Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
12 Power On Message
13 Busy Channel Lockout
14 Automatic Keylock
15 Receiving CTC
16 Transmitting CTC
17 Receiving DCS
18 Transmitting DCS
ting
19 Scan
20 PF1
21 Channel Mode
22 Auto Back Light (ABR)
23 Offset°
24 Shift (+ / -)°
28
OFF / BATT / MSG
OFF
: displays full display
BATT
: displays current voltage level
MSG
: displays HELLO TEAM
ON / OFF
No transmission on busy channels
ON / OFF
If no function key is pressed within 15 s, the key-
lock function is automatically activated. The key
symbol appears in the right, lower corner of the
display.
The stopwatch function (25) has to be set off
OFF / 50 CTCSS codes
select one out of 50 DCS codes for receiving
frequencies; 67 kHz - 254.1 kHz
OFF / 50 CTCSS codes
select one out of 50 DCS codes for transmitting
frequencies; 67 kHz - 254.1 kHz
OFF / 105 DCS codes
select one out of 2 x 105 DCS codes for receiving
frequencies; DO23N / I - DO754N / I
OFF / 105 DCS codes
select one out of 2 x 105 DCS codes for transmit-
frequencies; DO23N / I - DO754N / I
TO (Time Scanning - pauses scanning upon re-
ception of signal and continous scanning
after 5 s of no operation)
CO (Carrier Mode 1 - pauses scanning once
signal is received and continous scanning
after 3 s of disappearance of signal) /
SE (Carrier Mode 2 - scanning stops once signal
is received)
SCAN / LAMP / SOS-CH / RADIO / OFF
select one available functions
select display mode
CH
(displays channel no.)
CH FREQ (displays channel frequency)
NAME
(displays channel name)
ON / OFF
Frequency Shift (0 - 69,950 MHz)
Only available in the HAM version
Enter the frequency shift via the Up / Down
(8) keys or the rotary channel selector ().
Frequency Shift High / Low
Only available in the HAM version
- determines if in function 23 (offset) set frequen-
cy offset is shifted above (+) or below (-) the
25 Stopwatch
26 Channel Name
27 Memory Channels (MEM-CH)
28 Delete Channel (DEL-CH)
29 Reset
30 SCN CD
receiving frequency. The according symbol
(+, -) appears in the display.
ON / OFF - press key keylock (7) to start, press
any key to stop function
max. 6 digits composed of letters (A-Z),
numbers (0-9) and signs (?, +, -); select digits
with up key (8) or by turning channel selector
clockwise. To switch cursor to the next digit, turn
channel selector counter-clockwise
in VFO-Mode (only HAM version):
to store manually set frequencies
in channel mode: to copy pre-programmed
frequencies :
1. Select the channel to be stored.
2. Press the menu key (10) and select the
function 27 MEM-CH.
3. Press the menu key (10) and select a channel
where the selected frequency is to be stored.
4. Press the menu key (10) to confirm the selection
Comes handy when using different CTCSS/DCS
codes for one frequency.
This function is only available in the HAM version.
In VFO mode, manually stored frequencies are to
be deleted with this function
1. Press the menu key (10) and select the
function 28 Delete Channel (DEL-CH).
2. Press the menu key (10) and select the chan-
nel to be deleted with the channel selection Up
/ Down keys (8).
3. Press the menu key (10) and select the
the function 28 Delete Channel (DEL-CH).
For reset to default settings:
1. press menu key (10) & select RESET function 29
2. press menu key (10) & select ALL
3. press menu key (10) & enter password if
programmed in software;
Display shows WAIT. Reset is performed, menu
is exited and radio automatically returns to basic
operation.
This function is only available in the HAM version.
Code Scanning - only available when receiving a
signal
Setting: CTCSS / DCS
1. press menu key (10) & select 30 SCN CD
2. press menu key (10) & select CTCSS or DCS
3. press menu key (10) to confirm and to start
scanning
English
29
Publicidad
Capítulos
Tabla de contenido
