Temperature Control - Nevir NVR-4445 Manual De Instrucciones

TEST
Clean the parts of the freezer with lukewarm water on a soft cloth or with a
neutral detergent and with clear water, then wipe them dry.
Notes: Electric parts of the freezer can only be wiped by dry cloth.
Turn the thermostat knob on the middle position and turn on electricity. The
compressor and the light inside the freezer begin to work.
Close the door and wait 30 minutes. If the temperature in the freezer
compartment decreased obviously, it shows that the freezing system works
well. When the freezer operates for a period of time, the temperature
controller will automatically set the temperature on conditions that the door is
not too often opened.
If the above steps are successful, the trial operations are finished. The

TEMPERATURE CONTROL

The temperature in the freezer is controlled by the thermostat control
regulator in the upper the freezer. Turn the thermostat control regulator with
key attached up or down to regulate the temperature inside the freezer. The
markings on control regulator indicated the "Min, Max" for the different
temperature grades. The temperature decreases with position MIN being the
warmest and position MAX being the coldest.
Set the control to the middle position for normal use, but you may set the
control to other positions of you find the middle is too cold or too warm.
ALARM: Extensive temperature indicator
POWER: Electrical power indicator
SUPER: Super freeze indicator
SUPER FREEZE: Super freeze button
Super Freeze (Button)
If you need the temperature inside freezer to drop quickly, please press the
button and the indicator of Super will be on. The appliance runs in SUPER
FREEZE.
If you need the model to stop the function of SUPER FREEZE, please
-17-