Door Reverse - Nevir NVR-4445 Manual De Instrucciones

DOOR REVERSE

This freezer has been built with the door hinges on the right. If you want to
change the opening direction, please follow the instruction below.
WARNING: When reversing the door, the appliance must not be connected to
the mains. Remove the plug from the mains beforehand.
(1)
(2)
(3)
1. Remove the cover of the
s c r e w s ( 1 ) , a n d u n s c r e w t h e
screws(2), then remove the top
cover.
2. Remove the decoration of the
top cover(3), and fix it on the
opposite side.
3. Unscrew the upper hinge (4)
(4)
(5) and remove it.
4. Unscrew the upper hinge pivot
(5) and place it on the opposite
side.
5. Push the door up to remove it.
Put the door to one side and lay it
d o w n g e n t l y o n a p a d d e d
surface.
6. Remove the hinge pin (6) that
is in the bottom of the door. Turn
it over and insert it at the other
side of the door.
7. Lay the appliance on a padded
surface. Remove the bottom
(6)
hinge ( 7 ) and adjustable foot ( 8
) , then change the hinge axes to
left hole. Position and fix the
lower hinge by screws.
8. Lift up the appliance to vertical
position and fix the upper hinge
then adjust the door on the
h o r i z o n t a l l e v e l a n d f i x t h e
screws.
9. Position and screw the top
cover, laying the appliance on an
(7)
appropriate place.
(8)
-20-