Numark HDX Manual De Referencia página 6

2. Slot Load CD Drive – Designed to play commercially available CD and properly burned CDR and CDRW
discs. Insert the CDs you wish to play here. Do not insert mini CDs (CD3"/80mm CDs) or CDs of
an unusual shape as they may be damaged or damage the slot load mechanism.
3. Eject Button - Used to eject CDs from the player. The CD will only eject when it is not playing.
4. Track/Menu Select Knob
Track – Rotate to select tracks.
Menu Select – Press "Menu" then rotate to move through menu options. Pressing selects menu options.
5. High Torque Direct Drive Platter - Utilizes a 4.7 Kgf cm motor to turn the vinyl record. The platter
should not be held in position for sustained periods.
6. Vinyl Record – Controls the playback of the music, including scratching, pitch bend and cueing.
7. Play/Pause Button – Starts and stops playback and the platter. Pressing toggles between play and
pause of the platter. Each time PLAY is pressed after pausing, a new Cue Point is set.
8. Startup Adjust – Changes the amount of time for the platter to start when the PLAY button is pressed.
As the wheel is moved to the left, start time increases. As you turn the wheel, the current startup time is
shown on the display.
9. Brake Adjust - Changes the amount of time for the platter to stop when the PAUSE button is pressed.
As the wheel is moved to the left, braking time increases. As you turn the wheel, the display will indicate
the braking time.
10. Cue Button - Returns and pauses the music at the last set Cue Point. The Cue Point is the last place at
which the unit was paused and then PLAY or STUTTER was pressed. Pressing and holding the CUE button
will temporarily play starting from the cue point until you release the button. You can easily edit the cue
point by turning the record while paused. As you rotate the record the music will sound. By stopping
the wheel and pressing Play, a new cue point will be set.
11. Stutter Button – When pressed, the music will play from the current cue point or the last point of
pause. If you start from the last pause point while the unit is paused, a new Cue Point is set.
Repeatedly pressing this button while the unit is playing will restart the unit from the last Cue Point,
creating a "stutter" effect. This also works from "RELOOP".
12. Position Marker – Used as a visual reference of platter position.
13. Target Light – Illuminates the platter surface.
14. Record Button / Record Light – When recording from the audio inputs this button will blink to indicate
you are recording.
recording. See the section on recording for more information.
15. 33/45 RPM Button - changes the rotation speed of the platter and the music. The default mode is 33
RPM, so when 45 RPM is selected the speed and pitch increase 35%. The default platter speed can be
set from the "Playback Options" menu.
Pressing this button will take you to the record screen and arm the HDX for
4