Kenmore 363 Manual De Uso Y Cuidado página 23

LIGHT DOES NOT WORK
Check if... Then...
The power supply cord is unplugged° Firmly plug the cord into a live outlet with proper voltage,
The light bulb is loose in the socket° rum the temperature control to OFF and unplug the
refrigerator. Gently remove the bulb and reinserL Then
plug in refrigerator and reset the temperature control°
The light bulb has burned out° Replace with an appliance bulb of the same wattage, size,
and shape available at your local hardware store. "rum the
temperature control to OFF and unplug the refrigerator
prior to reptacemenL
REFRIGERATOR MOTOR SEEMS TO RUN TOO MUCH
Check if.,. Then.,.
The refrigerator that was replaced was an Modem refrigerators with more storage space require
older model more operating time°
The room temperature is hotter than normal. The motor will run longer under warm conditions.
The door is opened often or a large amount Adding food and opening the door warm the refrigerator.
of food has just been added. It is normal for the refrigerator to run longer in order to
cool the refrigerator back down.
The refrigerator was recently plugged in and The refrigerator wilt take up to 24 hours to cool
the temperature control was set correctly, completely.
The temperature control is set too cold. See Temperature Control section.
FROST OR ICE CRYSTALS ON FROZEN FOOD
Check if,,. Then...
The door is opened oftem When the door is opened, warm, humid air is allowed in
the freezer resulting in frost.
MOISTURE COLLECTS INSIDE
Check if... Then,.,
The door is opened often, When the door is opened, warm, humid air is allowed into
the refrigerator. The more the door is opened, the faster the
humidity builds up, and the more warm air the refrigerator
must cool.
MOISTURE FORMS ON OUTSIDE OF REFRIGERATOR
Check if... Then...
The weather is humid. This is normal. To help prevent rust, wipe surface dry ]
and set temperature control one setting colder.
J
23