Sony KE-32TS2U Manual De Instrucciones página 53

Menu category Menu item
Color System
Menu Function
Initial Setup
Auto Shutoff
Timer/Clock
Channel Fix
TV Setup
Model Name
Serial Number
Temperature
Unit Status Fan
Setting option
Select when the picture from a VCR of other television system is not very good. You can
adjust the setting only when the VIDEO input is selected.
Select how the MENU button on the remote functions.
On/Off: If the MENU button is pressed, the menu screen appears. If the button is pressed
again, the menu screen disappears. (factory setting)
Return: If the MENU button is pressed, the menu screen appears. If the button is pressed
while the menu screen appears, the menu returns to the previous screen. Some
menu operation changes.
Select to set the TV to change to the standby mode automatically if there is no broadcast
or input signal through the connected equipment.
Off: "Auto Shutoff" does not function.
5min: Changes to the standby mode after 5 minutes if there is no broadcast or input
signal.
10min: Changes to the standby mode after 10 minutes if there is no broadcast or input
signal.
Select this when you have a cable box or satellite receiver connected.
2-6: Select this to 'fix' your TV's channel setting to 2-6 and use the cable box or satellite
receiver to change channels. Select one of these settings if you have connected the
equipment to the VHF/UHF jack.
Video 1: Select this if you have connected the equipment to the AUDIO and VIDEO IN
jacks.
Select "Off" to turn off the Channel Fix feature.
Notes
• When you select Channel Fix, the Favorite channel cannot be used.
• When you select Channel Fix, you cannot use Channel Skip/Add or Auto Program in the
TV Setup menu. To use them, set Channel Fix to "Off."
Model name of this TV.
Serial number allocated for each TV
If "NG" flashes, follow the procedure in "Self-diagnosis function" (See page 58).
If "NG" flashes, follow the procedure in "Self-diagnosis function" (See page 58).
Adjusting Your Setup
US
53
(US)