Recording Menu Structure - Tascam DR-40 Manual Del Usuario

Level meters
9
These show the input signal levels. When
recording in OVERDUB MIX mode, these show
the levels of the mixed input and playback
sounds. The b mark at the −12dB position on
the scale is a guide for input level adjustment.
File name
0
The file name that will automatically be given
to recorded files is shown.
This shows the project name when there are
multiple files recorded in 4-channel recording
mode, dual recording mode or overdubbing
separate mode.
q Remaining recording time
This shows the remaining recording time until
the set maximum file size is reached (in hours:
minutes: seconds). If the remaining recording
time on the SD card is less, however, the
remaining recording time on the card is shown.
Low cut filter on/off status
w
This shows whether the low cut filter is on or
off. This icon is shown as light letters on a dark
background if the low-cut filter is set to 40Hz,
80Hz or 120Hz.
: Low cut filter off
: Low cut filter on
Level control function status
e
: Level control off
: Peak reduction on
: Automatic level control on
: Limiter on
r Effect on/off status
: Built-in effect off
: Built-in effect on
Peak value in decibels (dB)
t
This shows the peak input level value digitally.
Auto tone function status
y
This icon shows whether the auto tone function
is on.
Blank : Auto tone off
: Auto tone on
Note about recording standby
This unit has a recording standby function like that of
a professional recorder. In recording standby mode,
you can adjust the input level, for example, and then
start recording quickly.
When in recording standby, the REC indicator blinks
and the recording screen appears.

Recording menu structure

REC SETTING
Set the file format
FORMAT
BWF: 16bit / 24bit
WAV: 16bit / 24bit
MP3: 32 – 320k bps
Set the sampling frequency
SAMPLE
44.1k / 48k / 96k (Hz)
(96kHz for WAV only)
TRACK INC Set the automatic track incre-
mentation time
OFF, 5min, 10min, 15min, 30min,
60min
Set the low-cut filter
LOW CUT
OFF, 40Hz, 80Hz, 120Hz
Set the pre-recording function
PRE REC
ON, OFF
Set the auto-recording function
AUTO REC
MODE : OFF , NEW FILE , MARK
LEVEL : -6dB , -12dB , -24dB , -48dB
AUTO TONE Set the auto tone function
OFF, HEAD, HEAD+TAIL
TONE SECS Set the length of the auto tone
0.5SEC. , 1SEC. , 2SEC. , 3SEC.
Set the volume of the auto tone
TONE VOL
-12dB , -18dB , -24dB , -30dB ,
-36dB
TASCAM DR-40
13