Sony VPL-PX15 Manual De Instrucciones página 56

Setting Up the Projector
Setting the password
1
Click the Password icon in the Setup window.
The password setting dialog box appears.
Setup procedure is the same as that operated by the
projector.
For details, see "Setting the password" on page 9 (GB).
2
Click the APPLY button.
Setting up the network configuration
1
Click the Network icon in the Setup window.
The Network configuration window appears.
In this window you can set the items described in
steps 4 to 7 in "Setting up the network
configuration" on page 10 (GB).
For details, see "Setting up the network configuration"
on page 9 (GB).
2
Click the APPLY button.
The window for restart appears.
3
Click the RESTART button.
If the projector is turned on and the Network
Projector window is open, the projector's screen is
turned off for about 10 seconds, then the projector
restarts.
The network setting does not take effect until you
restart the projector.
14
(GB)
Setting up the wireless LAN environment
1
Click the Wireless LAN icon in the Setup window.
The dialog box for setting the Nickname, Access
Point ID, Encryption Key and Peer to Peer appears.
Setup procedure is the same as that operated by the
projector.
For details, see "Setting up a wireless LAN
environment–Using a wireless LAN access point/Peer to
Peer (Ad-hoc) mode" on pages 11 (GB) and 12 (GB).
2
Click the APPLY button.
Note
When using a specified wireless LAN PC card other
than VAIO or ORiNOCO, set up the wireless LAN
environment from the projector.