D-Link DES-7200 Guía De Instalación Rápida página 6

Installing the Fan Tray
The DES-7200 provides a ventilation system,
7210-FAN for DES-7210, and 7206-FAN for
DES-7206. Carry out the following steps to install
the fan tray:
1. Remove the blank panel of the fan tray
by loosening the captive screws with a
screwdriver.
2. Push the fan into the cabinet along the guide
rail.
3. Tighten the captive screws with a screwdriver.
Figure 4 shows the installed fan tray.
Figure 4. Installing the Fan Tray of the DES-7200
Installing the Power Supply
The DES-7200 system offers AC and DC power
options, which can be installed in the same way
by performing the following steps:
1. Remove one of the two blank panels from the
power module by loosening the two screws
with a Phillips-head screwdriver, as shown in
Figure 5.
Figure 5. Installing the Power Supply
of the DES-7210 and DES-7206
6  D-Link 6/10 Slot Chassis-Based Switch
2. Insert the power supply module into the
cabinet along the guide rail, as shown in
Figure 6.
Figure 6. Installing the Power Supply
of the DES-7210 and DES-7206
3. Tighten the screws on both sides of the
power supply by using a screwdriver, as
shown in Figure 7.
Figure 7. Installing the Power Supply
of the DES-7210 and DES-7206