MINOX DTC 395 Manual De Instrucciones página 22

image quality, but the corresponding data will require more
space on the memory card.
c) Video quality: Here you can select from various quality
options. The default option is 1080 P (FHD). If you select
a lower resolution, the details of the resultant video will be
less sharp but less space will be required on the memory
card.
d) Number of photos: 1, 2 or 3 photos. Select the number of
photos to be recorded when the camera is triggered. See
also "Interval setting".
e) Video duration: 10 - 59 seconds or 1 minute. Select the
duration of the video to be recorded when the camera is
automatically triggered. The default setting is 10 seconds.
f) Interval setting: Select the time duration during which the
camera should wait after being triggered before recording
further photos or videos. This prevents unnecessary opera-
tion of the camera in situations in which, for example, an
animal is unlikely to stay in front of the camera for long. The
interval can be set in the range 5 seconds to 60 minutes. The
default setting is 1 minute.
g) Time lapse: If you have selected the time lapse option for
the recording of photos or videos per section a, you can
define the time duration between the recording of images
here. You can select a time duration in the range 5 seconds
to 24 hours.
h) Shutter speed: We recommend 1/15 second to record high
resolution images at night; however, there can be motion
blurring at this setting. 1/20 second provides for moderate
resolution images at night and less motion blurring. 1/30
second provides less resolution at night but also the lowest
level of motion blurring in daylight. Please select the setting
that is most appropriate for your intended use.
i) Time stamp: On/Off. Select "On" if you wish the date, time,
temperature and phase of the moon to be shown in your
42
recorded images - otherwise select "Off".
j) Timer setting: On/Off. If you want the camera to be opera-
tional only during a certain period during each day, you can
select the appropriate time here. Set to "On" to select the
timer start and end time. Outside your selected time period,
the camera will not record photos or videos.
k) Password: On/Off. Select "On" if you wish to enter a
four-character password to prevent unauthorised use of
your camera. Please note that you will then have to enter
your password each time you switch on the camera. Import-
ant: If you forget your password, you can activate the came-
ra using the password "OPEN".
l) Serial number: Here you can enter a four-character serial
number or name that will be shown in your images. If you
are using several cameras simultaneously, you will then be
able to see which of your cameras has recorded a particular
image.
m) Flash: Auto/High/Low. Set here the required intensity of
the LED flash.
n) Audio recording: On/Off. Select here whether you wish
audio sounds to be also recording during video mode.
o) Automatic switch-off in "SETUP" mode: 3 minutes, 5
minutes, 10 minutes, Off. Select the time period after which
the camera is to be automatically deactivated while in
"SETUP" mode.
p) Illumination duration: 1 minute, 3 minutes, 5 minutes,
Off. The LCD monitor will be automatically deactivated after
the selected time.
q) Date/time settings: Set the date and time here.
r) Reformat the memory card: Yes, No. If you select "Yes"
and then press the "OK" button to confirm, all the data on
the memory card will be deleted. This is a useful option if
you are using memory cards that have also already been
used in other devices.
43