Maintenance - Ningbo Innopower Hengda Metal Products ORIOPOWER H5202 Manual De Instrucciones

MAINTENANCE

To enjoy years of outstanding performance from your heater, make sure you perform the following
maintenance activities on a regular basis:
 Keep exterior surfaces clean.
 Clean the outside of the heater, use a soft cloth soaked with water and a liquid detergent. Do not
use scouring pads or abrasive products.
 Do not use water, inflammable or abrasive cleaners.
 Regularly inspect the atmosphere analyzer and the aeration holes; if there is dust or lint, remove it
without damaging the burner or tubing.
 Take care not to hit or damage the surface of the burner (it's delicate), the fittings and gas tubes, the
tap and all the other components of the gas circuit.
 We recommend that you have the heater inspected once a year by authorized personal.
 If you decide not to use the heater for an extended period, it is a good idea to follow the instructions
below:
A) Close the tap on the cylinder and disconnect the regulator from the cylinder.
B) Store the cylinder in a well-ventilated room, far from inflammable or explosive materials and
preferably outside your home; never store the cylinder in a basement or attic.
C) The heater must be stored in a dry place and protected from dust (and even better in its
original packaging).
 If you decide not to use the appliance any more, we recommend that you disconnect the cylinder
following the above instructions for storage, make it inoperable by cutting the hose (and, if the
heater has a fan heater, also cut the electric cord, obviously after you have removed the plug from
the wall socket) and, if children are playing with it, make the dangerous parts harmless.
 Do not dispose of non-biodegradable products in the environment but dispose of them in
accordance with current law. At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated waste collection centre or to
a dealer providing this service. Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from inappropriate disposal and
enables the constituent materials to be recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of household appliances separately, the product is
marked with a crossed-out wheeled dustbin. Keep in mind that the heater is made of the following
materials:
A) Iron: heater cabinet, burner body, small hardware (screws, etc.)
B) Aluminum, gas tubes
C) Brass: tap, atmosphere analyzer
D) Plastic: wheels, piezoelectric igniter
E) Copper covered with rubber: piezoelectric igniter wire, thermocouple.
- 18 -
GB