Light Kit Assembly - Craftmade Triumph Guia De Instalacion

9. Light Kit Assembly.

If you wish to USE the light kit, remove 1 screw
from motor plate on underside of motor housing
and partially loosen the other 2 screws. Align
slotted holes in fitter plate with loosened screws
in motor plate, allowing molex connections from
motor housing to come through hole in middle
of fitter plate. Twist fitter plate to lock. Re-insert
screw that was previously removed and securely
tighten all 3 screws with Phillips screwdriver.
Remove 1 screw from underside of fitter plate
and partially loosen the other 2 screws. Connect
BLACK (or BLUE) wire from motor housing to
BLACK wire from the light kit fitter and WHITE
wire from motor housing to WHITE wire from
light kit fitter. Make sure molex connections snap
together completely. Align slotted holes in light
kit fitter with loosened screws in fitter plate.
Twist light kit fitter to lock. Re-insert screw that
was previously removed and tighten all 3 screws
securely.
Install the 75-watt halogen bulb, type JD E11,
included.
Tip: Do not touch glass portion of bulb with fingers
or hands. Oil from skin can cause bulb to overheat
and go out prematurely. Use cardboard box or
foam wrapping bulb was packed with to layer
around glass portion of bulb.
Locate slots on glass shade and align with
nodules on inside of fitter plate.
on glass shade and turn
until it slides completely into place.
IMPORTANT: The glass shade must be removed
in order to replace the bulb. When replacing the
bulb, please allow bulb and glass shade to cool
down before touching, keeping in mind not to
touch the bulb itself as described above (see
"Tip").
If you do NOT wish to use the light kit,
slots on metal cover and align with nodules on
underside of fitter plate. Gently push up on
metal cover and turn to the
until it slides completely into place.
CAUTION: Do not install the light kit fitter or the
bulb if you do NOT wish to use the light kit.
Gently push up
to the RIGHT (clockwise)
locate
RIGHT (clockwise)
page 8
motor plate
light kit fitter
bulb
glass shade
fitter plate
slot
metal cover
motor housing
fitter plate
molex
connections
slot