Troubleshooting Guide; Error Displays - Sony RM-X69RF Manual De Instrucciones

Troubleshooting guide

The following check list will assist in the correction of most problems which you may encounter
with your unit.
Before going through the check list below, refer back to the connection and operating procedures.
General
Problem
The operation buttons do not
function.
The sound skips due to
vibration.

Error displays

The following indication will flash for about five seconds.
Display
If the above mentioned solutions do not help to improve the situation, consult your nearest Sony
dealer.
Cause/Solution
• The built-in micro computer has malfunctioned.
n Press the reset button on the display unit.
• The connecting cords are not connected properly.
• The batteries in the wireless remote are weak.
• The distance between the wireless remote and the display unit
is too far.
• The CD/MD changer unit is installed in an unstable location.
n Re-install it in a stable location.
• Dirty or defective disc(s).
n Clean or replace it/them.
Cause
The disc magazine is not inserted in
the CD changer.
No disc is inserted in the CD/MD
changer.
The CD is dirty.
The CD is inserted upside down.
The CD/MD changer cannot be
operated because of some problem.
No tracks have been recorded on an
MD.
One or more CD or MD from the
changer will not play because of some
problem.
Solution
Insert the disc magazine with discs
into the CD changer.
Insert the disc in the CD/MD changer.
Clean the CD.
Insert the CD correctly.
Press the reset button of the display
unit.
Playback an MD with tracks recorded
on it.
Insert another CD/MD.
EN
15