NODOR Vinoteca V24B Manual De Instrucciones página 21

Use and Control - V24B
The Controls of Your Wine Cooler
POWER
To control this appliance turn on/off. To turn OFF the appliance,
press the button and hold 5 seconds.
LIGHT
To control the inner light turn on/off.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to lower (cool) the set temperature by 1°C/1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius
degree. To change the temperature from Fahrenheit to Celsius or
from Celsius to Fahrenheit, press the
same time for 5 seconds.
Setting the Temperature Control
• You can set the temperature as required by pressing the UP or
DOWN button. When you press the two buttons for the first time,
the LED readout will show the original temperature set previously
(the temperature preset at the factory is 12°C/54 ºF).
• The temperature will increase 1°C/1ºF if you press the UP but-
ton once, or the temperature will decrease 1°C/1ºF if you press
the DOWN button once.
• To view the "set" temperature at any time, press the UP or
DOWN button, the "set" temperature will temporarily "flash" in he
LED display for 5 seconds.
USE AND CONTROL – V41B
• The internal storage temperature will appear in
blue color in the temperature display window.
USE AND CONTROL – V41B
The Controls of Your Wine Cooler
The Controls of Your Wine Cooler
POWER
To control this appliance turn on/off. To turn OFF the
appliance, touch and hold the
POWER
the same time for 5 seconds.
To control this appliance turn on/off. To turn OFF the
appliance, touch and hold the
SET
the same time for 5 seconds.
To set or view the internal temperature setting for
each zone.
SET
To set or view the internal temperature setting for
LIGHT
each zone.
and buttons at the
c
F
c
F
c
F
and marks at
and marks at
and marks at
To set or view the internal temperature setting for
each zone.
LIGHT
To control the inner light turn on/off.
UP
Used to raise (warm) the set temperature by 1°C or
1ºF.
DOWN
Used to lower (cool) the set temperature by 1°C or
1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit
or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit,
press the button for 5 seconds.
Setting the Temperature Control
The wine cooler has two temperature zones. The
temperature settings of LOWER ZONE and UPPER
ZONE are adjustable with the range 5º-22ºC/40º-
72ºF. It is recommended to set the LOWER ZONE
to 13-22ºC / 55-72ºF which is ideal for storing white
and red wines and the UPPER ZONE to 5-13ºC /
40-55ºF which is ideal for storing sparkling and
white wines.
NOTE: The temperature set for the LOWER
ZONE must always be the same or higher than
that in the UPPER ZONE. For optimal
performance, the set temperature of the two
zones should differ by at least 4°C.
that in the UPPER ZONE. For optimal
 You can touch SET mark to set the internal
performance, the set temperature of the two
temperature for each zone. The degrees
zones should differ by at least 4°C.
that in the UPPER ZONE. For optimal
indicators will appear in the display window
performance, the set temperature of the two
marked for UPPER ZONE and
 You can touch SET mark to set the internal
zones should differ by at least 4°C.
LOWER ZONE.
temperature for each zone. The degrees
indicators will appear in the display window
 You can touch SET mark to set the internal
 When you touch the SET mark for the first time,
marked
temperature for each zone. The degrees
the LED readouts will show the original
LOWER ZONE.
indicators will appear in the display window
temperature sets previously (the preset
temperature at the factory for UPPER ZONE is marked
 When you touch the SET mark for the first time,
10ºC / 50ºF and for LOWER ZONE is 16ºC /
LOWER ZONE.
the LED readouts will show the original
60ºF).
temperature sets previously (the preset
 When you touch the SET mark for the first time,
temperature at the factory for UPPER ZONE is
 Touch the SET mark once. The left LED
the LED readouts will show the original
10ºC / 50ºF and for LOWER ZONE is 16ºC /
indicator for UPPER ZONE will flash. Then
temperature sets previously (the preset
60ºF).
touch the UP or DOWN marks to set the desired
temperature at the factory for UPPER ZONE is
temperature.
10ºC / 50ºF and for LOWER ZONE is 16ºC /
 Touch the SET mark once. The left LED
60ºF).
indicator for UPPER ZONE will flash. Then
When you touch the SET mark again, the right

touch the UP or DOWN marks to set the desired
LED indicator for LOWER ZONE will flash. Then
 Touch the SET mark once. The left LED
temperature.
proceed to touch the UP or DOWN marks to set
indicator for UPPER ZONE will flash. Then
the desired temperature for the LOWER ZONE.
touch the UP or DOWN marks to set the desired
 When you touch the SET mark again, the right
temperature.
LED indicator for LOWER ZONE will flash. Then
 The temperature will increase 1°C or 1ºF if you
proceed to touch the UP or DOWN marks to set
touch the UP mark once, or the temperature will
for
for UPPER ZONE and
for UPPER ZONE and
9
for
for