Temperature Display - NODOR Vinoteca V24B Manual De Instrucciones

LED indicator for LOWER ZONE will flash. Then
proceed to touch the UP or DOWN marks to set
the desired temperature for the LOWER ZONE.
 The temperature will increase 1°C or 1ºF if you
touch the UP mark once, or the temperature will
decrease 1°C or 1ºF if you touch the DOWN
mark once.
 To view the "set" temperature in either zone at
any time, touch the UP or DOWN mark, the "set"
temperature will temporarily "flash" in the LED
display for 5 seconds. You can touch the SET
mark to view the temperature setting from one
zone to the second zone.

Temperature Display

During normal operation, the temperature display on
the control panel shows the temperature inside the
appliance. The temperature display will flash if
- A different temperature is being set,
- The temperature in the zone deviates by more
than 5°C from the set temperature. The
temperature display flashing ensures that the
temperature can not rise or fall un-noticed and
impair the wine.
Use and Control - V24B
The Controls of Your Wine Cooler
Upper control unit
Lower control unit
POWER
To control this appliance turn on/off. To turn OFF the appliance,
press the button and hold for 5 seconds.
LIGHT
To control the inner light turn on/off.
« UP »
Used to raise (warm) the set temperature by 1°C or 1ºF.
« DOWN »
Used to lower (cool) the set temperature by 1°C or 1ºF
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius
degree. To change the temperature from Fahrenheit to Celsius
c
F
c
F
or from Celsius to Fahrenheit, touch and hold button the for 5
seconds.
SETTING THE TEMPERATURE CONTROL
The wine cooler has three temperature zones. The temperature
of all zones can be set separately.
The temperature settings of UPPER ZONE are adjustable with
the range +14°C et +22°C (+57°F et +72°F), the preset tempe-
rature at the factory is16°C/60°F.
The temperature settings of MIDDLE ZONE are adjustable with
the range 5º-11ºC/40º-52ºF. The preset temperature at the fac-
tory is 8ºC / 46ºF.
The temperature settings of LOWER ZONE are adjustable with
the range 11º-13ºC/52º-56ºF. The preset temperature at the fac-
tory is 12ºC / 54ºF.
Temperature control for upper and middle ZONE at upper control
unit. Temperature control for lower ZONE at lower control unit.
• To view the "set" temperature in either zone at any time, touch
the UP or DOWN mark, the "set" temperature will temporarily
"flash" in the LED display for 5 seconds.
Dynamic Cooling/Silent Modes
This Dynamic Cooling enables the relative humidity
inside the unit and the temperature to be distributed
evenly around the interior so you can store all your
wine under exactly the same excellent conditions. If
you would like to use the unit to store wine long term,
the dynamic cooling is a must. This will create a
continuous climate in the cabinet which imitates that
of a wine cellar.
In the Dynamic Cooling, the interior fan will cycle on
and off to circulate the inside air. To switch off the
Dynamic Cooling, touching and holding the UP mark
for at least 5 seconds and you can hear "B B B"
three sounds and the unit will work in Silent mode.
To switch on the Dynamic Cooling, touching and
holding the LOWER mark for at least 5 seconds and
you can hear "B B B B B" five sounds and the unit
will work in Dynamic Cooling mode.
Built-in Cabinet Instructions
This unit is designed for both built-in or free standing installation.
If you plan to use this unit in a built-in application please follow
the requirements shown to the below.
Cabinet Opening Dimensions
Width
Depth
Height
I
300 mm
600 mm
875 mm