Dolby Digital/Truehd Discs; Dolby Digital Surround Ex Discs; Dolby Digital 2.0 Discs; Dts/Dts-Hd 5.1 Discs - Rotel RSP-1572 Manual De Instrucciones

30

Dolby Digital/TrueHD discs

Dolby Digital Surround EX discs

Dolby Digital decoding is auto-detected and cannot be overridden. You
may, however, select a 2-channel down mix of 5.1 channel recordings.
In a 6.1 or 7.1 channel system, you can also choose Dolby Surround
EX, Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Cinema (7.1 channel
only), or Rotel XS processing for center back channels.
Note: In addition to the options that follow, you can press the 2CH button
on the remote to toggle between 2-channel down mix and multichannel
playback.
• On a 5.1 system . Press the SUR+ button on the remote, then press
the Left/Right buttons to change between DD 5.1 channel or DD
2.0 channel down mix playback.
• On a 6.1 system . Press the SUR+ button on the remote, then use the
Left/Right buttons to step through five options: DD 2.0 channel down
mix, DD 5.1 channel, DD Surround EX center back processing, DD
with Pro Logic IIx Music center back processing or DD with Rotel
XS center back processing. You should typically select Surround EX
or discs that are labeled Dolby Digital Surround EX. For standard
5.1 channel discs, Dolby Pro Logic IIx Music or Rotel XS processing
will provide a more diffuse surround effect than the more highly
localized Dolby EX decoding and will probably be the better
6.1 channel options for non-Surround EX discs. Selecting DD 5.1
forces the center back channel processing off for conventional 5.1
channel playback.
• On a 7.1 system . Press the SUR+ button on the remote, then use the
Left/Right buttons to step through six options: DD 2.0 channel down
mix, DD 5.1 channel, DD Surround EX center back processing, DD
with Pro Logic IIx Music center back processing, DD with Pro Logic
IIx Cinema back channel processing, or DD with Rotel XS center
back processing. You should typically select Surround EX or discs
that are labeled Dolby Digital Surround EX. For standard 5.1 channel
discs, Dolby Pro Logic IIx Music or Rotel XS processing will provide
a more diffused surround effect than the more highly localized Dolby
EX decoding and may be the better 7.1 channel options for non-
Surround EX discs. Selecting DD 5.1 forces the center back channel
processing off for conventional 5.1 channel playback.
Note: When playing any Dolby Digital source, you can select one of
three dynamic range control settings. For Dynamic Range adjustments
please refer to Overview of Buttons and Controls section of this manual,
under DISPLAY (DISP) Button. In the case of Dolby TrueHD source, there
is an AUTO mode.
RSP-1572 SURROUND SOUND PROCESSOR

Dolby Digital 2.0 discs

Dolby Digital decoding is auto-detected and cannot be overridden. You
may, however, select 2-channel playback, 5.1 channel playback with
Pro Logic II matrix surround, 6.1/7.1 channel playback with Pro Logic
IIx/IIz matrix surround, or Dolby 3-Stereo playback.
. Press the SUR+ button on the remote, then use
• On a 5.1 system
the Left/Right buttons to step through four options: DD 2.0 channel,
DD with Pro Logic II Cinema matrix surround, DD with Pro Logic II
Music matrix surround, or Dolby Digital 3 channel stereo. You can
also repeatedly press the 2CH button on the remote or front panel
to select the same options.
. Press the SUR+ button on the remote, then use
• On a 6.1/7.1 system
the Left/Right buttons to step through four options: DD 2.0 channel,
DD with Pro Logic IIx Cinema matrix surround, DD with Pro Logic IIx
Music matrix surround, Pro Logic IIz (7.1 ch only), or Dolby Digital
3 channel stereo. You can also repeatedly press the 2CH button on
the remote or front panel to select the same options.
• To select Cinema or Music options in Pro Logic II or Pro Logic IIx
modes. Press the SUR+ button twice while in Pro Logic II or Pro
Logic IIx modes. Then, use the Left/Right buttons to select the Music
or Cinema options.
Note: When playing any Dolby Digital source, you can select one of
three dynamic range control settings. For Dynamic Range adjustments
please refer to Overview of Buttons and Controls section of this manual,
under DISPLAY (DISP) Button.

DTS/DTS-HD 5.1 discs

DTS 96/24 discs

DTS-ES 6.1 discs

DTS decoding is auto-detected and cannot be overridden. You may,
however, select a 2-channel down mix of 5.1 channel recordings or add
Rotel XS center back processing for 5.1 channel discs.
Note: In addition to the options that follow, you can press the 2CH
button on the remote or front panel to toggle between 2-channel down
mix and multichannel playback.
• On a 5.1 system . Press the SUR+ button on the remote, then press
the Left/Right buttons to change between DTS 5.1 channel or DTS
2.0 channel down mix playback.
• On a 6.1/7.1 system with a DTS/DTS-HD 5.1 disc.
button on the remote, then use the Left/Right buttons to step through
the optional modes: DTS 2.0 channel down mix, DTS 5.1 channel,
DTS with Rotel XS center back processing, DTS with Pro Logic
IIx Music center back processing, DTS with Pro Logic IIx Cinema
center back processing (available only for 7.1 channel systems).
Selecting DTS 5.1 forces the center back channel processing off for
conventional 5.1 channel playback.
• On a 6.1/7.1 system with a DTS-ES disc.
on the remote, then use the Left/Right buttons to step through three
optional modes: DTS 2.0 channel down mix, DTS 5.1, or DTS-ES
6.1ch/7.1ch playback.
• On a 6.1/7.1 system with a DTS 96/24 disc.
button on the remote, then use the Left/Right buttons to step
Press the SUR+
Press the SUR+ button
Press the SUR+