Zanussi ZHC4284 Manual De Instrucciones página 19

Fixing the Frame
located at the sides of the frame.
all the screws removed as above.
• Fix the Fixing Part of the Upper Chimney 26 to the
hanging kit using the 2 screws 12w
up to the slot end positions.
• Tighten the two screws and fasten the other two
sure that the screws do not come out of their housing
• It is now possible to place and tighten the 4 safety
rence the holes of the side parts of the
• insert the 4 dowels (provided).
• insert the washers (provided) to the screws and
tighten the screws
• The Frame must be securely fastened so as to support
both the weight of the Hood and the stress caused by
• If the Ceiling is not strong enough in the area where
area using suitable plates and counterplates anchored
to resistant structures.
• Lift the frame up, making sure that the index over the
frame plate is turned backwards.
• Fit the frame slots onto the two screws inserted in the
ceiling as above, and turn until reaching the centre of
• Tighten the two screws and fasten the other two screws
that the screws do not come out of their housing in
• The Frame must be securely fastened so as to support
both the weight of the Hood and the stress caused by
• If the Ceiling is not strong enough in the area where
the area using suitable plates and counterplates an-
GB
INSTALLING THE COOKER HOOD
-
1
2
12w
26
1
2
19