Switch On/Off; Accessories - Festool CARVEX PS 420 EBQ Manual De Instrucciones

For precise cuts and smooth running, use two
hands to guide the electric power tool.
Free saw guidance along a scribe mark
The triangular pointer on the splinterguard [3-1]
indicates the cutting line of the saw blade. This fa-
cilitates sawing along a scribe mark.

Switch on/off

The electric power tool has one button [1-2] on
each side for switching on/off.
The PSB 420 EBQ also has a variable speed trigger
[1-3] with switch lock [1-4]. For continuous opera-
tion, use the button [1-2].
Lighting
WARNING
The stroboscope light may make it difficult to de-
termine the saw blade position
Risk of injury

Ensure the work area is well illuminated.
WARNING
Looking into the light source can damage your vi-
sion.

Do not look into the stroboscope light.
Use only original Festool accessories and Festool
consumable material intended for this machine be-
cause these components are designed specifically
for the machine. Using accessories and consum-
able material from other suppliers will most likely
14
A continuous light or stroboscope is installed for il-
luminating the cutting line:
up to approx. 2100 rpm: continuous light
from approx. 2100 rpm: stroboscope light
 In overhead position (+/- 45°), the lighting is
switched off completely.
If required, you can adjust the lighting:

Plug in the electric power tool.

Press both buttons simultaneously [1-2] and
hold for approx. 10 s until a beep sounds.

Release both buttons [1-2].

Press the left button (on the pendulum stroke
side) to select the stroke speed and conse-
quently the desired operating mode:
Mode Indication during
configuration
1 Light flashes
2 Light on
3 Light off

Press the right button to save the setting.
The following precautions are to be taken
when processing metals for safety reasons:
– Pre-connect a residual current circuit-breaker
(FI, PRCD).
– Connect the machine to a suitable dust extractor.
– Clean tool regularly of dust accumulations in the
motor housing.
Wear protective goggles.

Accessories

affect the quality of your working results and limit
any warranty claims. Machine wear or your own
personal workload may increase depending on the
application. Protect yourself and your machine, and
preserve your warranty claims by always using
Behaviour during
operation
With stroboscope
(standard)
Permanent light
without stroboscope
Light switched off
Metalworking