Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A - ENGLISH
TABLE OF CONTENTS
Safety Precautions ....................................................................A-2
Handle Assembly .......................................................................A-3
Machine Operation ....................................................................A-4
Machine Maintenance & Storage ..............................................A-5
Vac Head Assembly Assy ................................................D-2 – D-3
Wiring Diagram ......................................................................... D-3
Tank Assembly .................................................................D-4 – D-5
Accessories .............................................................................. D-6
SAFETY PRECAUTIONS
This machine is intended for commercial use. It is constructed for use in an indoor environment and is not intended for any other use. Use only
recommended accessories.
All operators shall read, understand and exercise the following safety precautions:
1)
Do not operate machine:
•
Unless trained and authorized.
•
Unless you have read and understand operators manual.
•
In fl ammable or explosive areas.
•
With damaged cord or plug.
•
If not in proper operating condition.
•
In outdoor areas.
•
In standing water.
•
Without bag / fi lters in place.
•
With the use of extension cords.
2)
Before operating machine:
•
Make sure all safety devices are in place and operate properly.
3)
When using machine:
•
Do not run machine over cord.
•
Do not pull machine by cord or plug.
•
Do not pull cord around sharp edges or corners.
•
Turn power switch to "off " prior to unplugging machine..
•
Do not unplug by pulling on the cord.
•
Do not stretch cord.
•
Do not handle plug with wet hands.
•
Keep cord away from heated surfaces.
•
Do not pick up burning or smoking debris such as cigarettes, matches or hot ashes..
•
Report machine damage or faulty operation immediately.
4)
Before leaving or servicing machine:
•
Turn off machine.
•
Unplug cord from outlet.
5)
When servicing machine:
•
An experienced technician should only perform service work.
•
Unplug cord from outlet.
•
Use manufacturer supplied or approved replacement parts.
GROUNDING INSTRUCTIONS
!!! This machine must be grounded! Grounding provides the path
of least resistance for electrical current. To reduce the risk of
electrical shock should the machine malfunction, the machine has
a special grounding plug. Do not remove the ground pin under any
circumstances!
A - 2
INSTRUCTIONS FOR USE
Page
Summit Pro 18SQ - 56091118
Grounding Pin
FIGURE 1
Adapte
Metal Scre
Grounded Outlet
Grounded Outlet Box
12/13
Publicidad
Tabla de contenido
