M e d i a
3. If you have already saved radio channels, select
channel you would like to listen to.
To select a radio channel location, briefly press the corresponding number keys.
4. To turn off the radio, press and hold the end key, or select
Options
With the radio on, select
Turn
off—Turn off the radio.
Save
channel—Save the current station to one of 20 locations (only available
with a new station entered).
Channels—Scroll up or down to select a channel from 20 locations. With an
existing channel highlighted, select
delete or rename the saved channel.
Mono output
or
Stereo
in stereo. Stereo output is available through a stereo enhancement.
Loudspeaker
or Headset—Listen to the radio through the speakerphone or
through the headset.
Set
frequency—Manually enter the frequency of a known radio station.
To set the radio frequency, press * and use the keypad to enter the frequency of a
known radio station.
To adjust the radio volume, press the volume up and down keys.
When an application using a browser connection is sending or receiving data, it
may interfere with the radio.
When you place or receive a call, the radio automatically mutes. When the call
ends, the radio switches back on.
Tune and save a radio channel
You can save a preset station to any one of 20 locations in memory.
1. With the radio on, select
steps, or select and hold
when a channel is found.
2. To save the channel, select
3. Enter a name for the channel, and select OK.
48
Options
and one of the following:
Options
output—Listen to the radio in monaural mode (default) or
or
to change the radio frequency in 0.1 MHz
or
to start the channel search. Searching stops
Options
>
Save
or
to scroll to the
Options
>
Delete channel
or
channel.
>
Turn
off.
Rename
to