Location information will always be shared with the network during emergency
calls to the official emergency number programmed into the device, regardless of
which setting is selected. After placing an emergency call the device remains in
emergency mode for 5 minutes. During this time, the location information will be
shared with the network. See "Emergency calls," p. 87.
Anykey answer
Anykey answer enables you to answer an incoming call. Briefly press any key
except the right selection key or end key.
In the standby mode, select
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your device redials the
number (number of times is specified by the network), and notifies you when the
network is available.
In the standby mode, select
1-touch dialing
You can activate or deactivate 1-touch dialing. In the standby mode, select
Settings
>
Call
>
1-touch dialing
Automatic service update
Your device is capable of receiving updates to wireless services sent to your
device by your service provider. In the standby mode, select
Call
>
Automatic update of service
Open fold to answer
By default, your phone answers an incoming call when you open the fold. You can
change the default setting to have your phone not answer calls with the fold open.
In the standby mode, select
On
or Off.
Calling card
If you use a calling card for long distance calls, you can save the calling card
numbers in your device. Your device can store up to four calling cards. Contact
your calling card company for more information.
Menu
>
Settings
>
Menu
>
Settings
>
Call
>
On
or Off. See "Set up 1-touch dialing," p. 40.
>
On
or Off.
Menu
>
Settings
>
Call
Call
>
Anykey answer
>
Automatic redial
Menu
>
>
Answer when fold is opened
S e t t i n g s
>
On
or Off.
>
On
or Off.
Menu
>
Settings
>
>
55