Notes To The User; Symbols And Conventions; Scope Of Delivery; Approvals And Markings - Balluff BTL5-H1-M-A/B/Y/Z-S94 Serie Manual De Instrucciones

BTL5-H1 _ _ -M _ _ _ _ -A/B/Y/Z(8)-S94
Magnetostrictive Linear Position Sensor – Rod Style
1

Notes to the user

1.1 Validity
This guide describes the construction, function and setup
options for the BTL magnetostrictive linear position sensor
with CANopen -interface. It applies to models
®
BTL5-H1 _ _ -M _ _ _ _ -A/B/Y/Z(8)-S94 (see Type code
on page 19).
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the BTL.
1.2

Symbols and conventions

Individual actions are indicated by a preceding triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.3

Scope of delivery

– BTL
– Condensed guide
The magnets are available in various models
and must be ordered separately.
1.4

Approvals and markings

UL approval
File no.
E227256
US-Patent 5 923 164
The US patent was awarded in connection with this
product.
www.balluff.com
The CE Mark verifies that our products
meet the requirements of the current
EMC Directive.
The BTL meets the requirements of the following product
standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Surge
EN 61000-4-5
– Conducted interference induced
by high-frequency fields
EN 61000-4-6
– Magnetic fields
EN 61000-4-8
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1.5

Abbreviations

DS 301 The CANopen communication profile is
®
described in CiA draft standard 301.
®
Node ID Node number for device-specific identification
PDO Process data object
Element for data transfer (process data
messages with a high priority)
SDO Service data object
Service element for configuring the bus node
(service data messages)
Severity level 3
Severity level 3
Severity level 3
Severity level 2
Severity level 3
Severity level 4
english 5