Storage - Gardena EasyCut 42 Manual De Instrucciones

Recortasetos eléctrico
Ocultar thumbs Ver también para EasyCut 42:
Tabla de contenido

Publicidad

Working positions :
1
a
b
b
Starting the Hedge Trimmer :
9
1
0

5. Storage

Storage :
5
4
Disposal :
(in accordance with
RL2002 / 96 / EC)
14
The hedge trimmer can be operated in 3 working positions.
Side trimming:
v Take guide handle
b
at the side
.
DANGER ! Risk of physical injury !
If the Hedge Trimmer does not switch off auto-
A
matically, there is a risk of lacerations.
V Never override the safety devices (e.g. by
strapping down one of the start buttons).
Starting the Hedge Trimmer :
The hedge trimmer is fitted with a two-handed safety device (2 start
buttons) to prevent the unit from being turned on by accident.
A
1. Remove the protective cover
2. Hold the guide handle
9
button
.
3. Hold the main handle
0
start button
The hedge trimmer will start.
Switching the Hedge Trimmer off :
1. Release the two start buttons
2. Slide the protective cover
The hedge trimmer must be stored out of the reach of children.
1. Disconnect the mains plug.
2. Clean the hedge trimmer (see 6. Maintenance) and slide the
protective cover
3. Store the hedge trimmer in a dry, frost free place.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important : Make sure that the unit is disposed of via your
municipal recycling collection centre.
High trimming :
1
v Take guide handle
a
at the top
.
4
from blade.
1
with one hand and press the start
A
with the other hand and press the
.
9
0
/
.
4
over the cutter blade
4
over the cutter blade
Low trimming :
1
v Take guide handle
a
at the top
.
5
.
5
.
1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Easycut 4688708871

Tabla de contenido