Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION MANUAL AND INSTRUCTIONS
- HYPER TERMINAL®
The standard Hyper Terminal® program found in Microsoft® Windows allows the user to view and
store serial output data.
- LIMIT OUTPUT
The serial port will output LO / OK / HI before the torque value when the limits are being used.
Some software will not accept LO / OK / HI characters.
The following table gives all options for the FIRST CHARACTER setting and the OUTPUT LIMITS
setting:
First character
-
+ & -
NONE
- DATA OUTPUT EXAMPLE
Code : DP=Decimal Point.
Dynatester with the serial port set to the factory defaults. Reading 1068.4 lbf.ft (clockwise).
1
0
6
- CONNECTOR TYPE
9 way male 'D' type connector.
- PIN CONNECTIONS
Pin No
1
Not Connected
2
Received data (to Dynatester)
3
Transmitted data (from Dynatester)
4
Not Connected
5
Signal ground 0V.
6
Not Connected
7
Not Connected
8
Not Connected
9
Not Connected
Direction
Clockwise
Anti Clockwise
Clockwise
Anti Clockwise
Clockwise
Anti Clockwise
CR=Carriage Return.
8
DP
4
SP
Function
Limits disabled
Output limits = NO
1,0335 Nm
-1,0335 Nm
+1,0335 Nm
-1,0335 Nm
1,0335 Nm
1,0335 Nm
SP=Space.
I
b
f
DP
Limits enabled
Output limits = YES
LO 1.0335 Nm
LO -1.0335 Nm
LO +1.0335 Nm
LO -1.0335 Nm
1.0335 Nm
1.0335 Nm
f
t
CR
EN
25
Publicidad
Tabla de contenido
