Operating Method; How The Machine Makes Ice; Makes Ice - Franklin Chef FIM70 Manual Del Usuario

Ocultar thumbs Ver también para FIM70:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating
Method
1. Switch on the Power switch on the right
side panel. The light will be on. The ice
maker will start working automatically
and feeding water.
.
After the first feeding of the water, the
machine will automatically
go to the ice
making stage, and the sound of water
spraying will be heard.
J
.
Ice will be harvested
to the ice storage
bin. When the storage bin is filled to the
point that the ice-full sensor is covered,
the ice maker will automatically
stop
working.
The machine will restart
making ice once the storage bin is less
than full.
4. Excess water will flow through the drain
outlet at the back of the machine and empty into the floor drain.
IMPORTANT:
Although
the unit has' been tested
at the facto1%
due to long-term
transit
and storage,
the first
batch of cubes
must be discarded.
Never
turn the water
supply
tap q[fwhen
the icemaker
is working.
How the Machine
Makes
Ice
There are two distinct cycles: freeze and harvest.
During the freeze cycle, water is sprayed against the evaporator
surface.
In the harvest cycle, the ice is released
and water enters the machine.
A complete
cycle
takes about 20 minutes, but is dependent
on temperature
and operating conditions.
Freeze:
During the freeze cycle the compressor
is pumping refrigerant,
the fan motor is
blowing
air, and the water pump is circulating
water. When the batch of ice has been
fully formed, the ice maker stops the freeze cycle and begins to harvest the ice.
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fim90Fim120

Tabla de contenido