Lacework; Multiple Zigzag Stitch - Sears Kenmore 85.12314 Manual De Instrucciones

LaceWork
0 Stitch selector: E
(_) Stitch length: 1 to 3
(_) Needle thread tension: 1 to 4
(_ Presser foot: Zigzag foot
Lace adds a fanciful, feminine touch to blouses and linge-
rie Table linens and pillows become more elegant when
trimmed with lace_ Fold the raw edge of the fabric at least
5/8" (1_5cm). Place lace underneath and topstitch with blind
hem stitch. Trim excess fabric close to stitching
O ®
TYPE LENGTH
J
Multiple Zigzag Stitch
O Stitch selector: D
(_) Stitch length: 0,5 to 1
Q Needle thread tension: 1 to 4
(_ Presser foot: Zigzag foot
This is used to finish seam allowance on synthetics and
other fabrics that ten_ to pucker. The stitch is also excellent
for darning and mending tears,
[] Seam finishing
Place fabric under the presser foot in such a manner that
the edge is slightly inside the right-hand side of the presser
foot. Guide the fabric so that the right hand stitches fail at
the edge of the fabric,
[] Mending
Position tear under the needle so that the stitch catches
both sides,
<
0
TYPE
-@
®
LENGTH
f
[]
f
[]
48