Polar CK640 Manual De Instrucciones página 9

Ocultar thumbs Ver también para CK640:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 74
Timed Positive Blast Chilling And Storage Cycle
To start the cycle:
During chilling:
Once the chilling
period has
elapsed:
During storage:
To interrupt the
cycle:
Timed Negative Chilling And Storage Cycle
To start the cycle:
CK640_ML_A5_v4_20200728.indb 9
CK640_ML_A5_v4_20200728.indb 9
ensure the device is in "stand-by" mode and no procedures are running
press
to select "PoS" and ensure the LED
press
within 15 seconds: the display will show the duration of the blast
chilling step (in minutes)
press
or
within 15 seconds to change the value (the setting
remains active until another cycle is selected, when the value assigned by
parameter r1 is restored)
press
: after 2 minutes, the appliance will run timed positive blast
chilling and storage cycle
the display shows the residual chilling time remaining
the LED
is on
parameter r1 sets the chilling time duration
parameter r7 sets the operational set point
press
several times to:
- display the message "PoS"
- display the cabinet temperature
- exit the procedure, or leave for 15 seconds
the device switches to storage mode
the display shows the message "End"
the buzzer sounds for the period of time set by parameter AA
press any key to mute the buzzer; press once more to cancel the message
"End"
the display shows the cabinet temperature
the LEDs
and
are on
the parameter r9 sets the operational set point
press
several times to:
- display the message "PoS"
- exit the procedure, or leave for 15 seconds.
press
for 2 seconds
ensure the device is in "stand-by" mode and no procedures are running
press
to select "nEg" and ensure the LED
press
within 15 seconds: the display will show the duration of the blast
chilling step (in minutes)
press
or
within 15 seconds to change the value (the setting
remains active until another cycle is selected, when the value assigned by
parameter r2 is restored)
press
: after 2 minutes, the appliance will run timed negative chilling
and storage cycle
UK
is flashing
is flashing
9
2020/7/28 17:38
2020/7/28 17:38

Publicidad

Tabla de contenido
loading

Tabla de contenido