A - The Watermaker; Presentation; Characteristics - Aqua-Base XD Serie Manual De Utilización

1 – PRESENTATION
The AQUA-BASE range XD desalination unit is composed of :
- a main module assembled in a compact frame, which includes the pump, the R/O treatment module, the electrical circuit and its
control panel,
- a power electric box,
- a sea water filter,
- a booster pump,
- pipes, fittings and fixation components necessary for installation.
- Hull fitting and hull valve are not included in the supplies.
In order to make installation easier in inaccessible or particularly cramped areas, to improve utilisation convenience, it is possible to :
- separate the R/O module from the main module, in which case a separation kit can be supplied,
- deport the control panel by using a kit which groups together all the necessary components to that end.
- Option :
Separation kit,
Remote panel,
Semi-automatic rinsing.
2 – CHARACTERISTICS
TYPE
Dry mass
Nominal capacity
Maximal capacity
Pressure
Pipes
Feeding
Reject
Production
Voltage
Elec. Consumption
(1) The pressure is adjustable, to optimise performances, according to operating conditions.
(2) The nominal capacity is given for a new unit, nominal membranes performances, operating in standard sea water TDS 35000ppm (35g/l) and temperature
25°C. The capacity can vary from +/-15%, according to allowances given by the membranes manufacturers.
(3) This flow is the maximum authorized. Pressure should be adjusted in order not to exceed this : it should particularly be reduced as soon as the sea water
salinity noticeably decreases, notably at river mouths.
See the General Layout XD in ANNEXES page 44.
See the On board installation XD in ANNEXES page 45.
A – THE WATERMAKER
Kg
(2) l/h
(3) l/h
(1) bar
A / B / D mm
C mm
E / F mm
Vcc
A
J:\MANUEL-DOCUMENTATION\Projet manuels SLCE\1-SW PLAISANCE\AQUABASE XD\AQUABASE XD FRUKES 07-2007-A.doc
XD121 XD122
34 40
30 50
35 70
12
31
XD241
36
30
35
40 à 70
19 x 26
8 x 13
8 x 13
24
25
VERSION 2007-07-A
XD242
42
60
70
FR/UK/ES Page 16/50