Sony Trinitron PVM-14M4U Manual De Instrucciones página 17

Inputs (common to all models)
LINE A/B
VIDEO IN BNC connector (×2), 1Vp-p ±6 dB,
sync negative
AUDIO IN Phono jack (×2), –5 dBu
47 kilo-ohms
LINE C
Y/C IN 4-pin mini-DIN (×1)
See the pin assignment on page 19.
AUDIO IN Phono jack (×1), –5 dBu
47 kilo-ohms
RGB/COMPONENT
R/R-Y,G/Y,B/B-Y IN: BNC connector (×3)
R, G, B channels: 0.7 Vp-p, ±6 dB
Sync on green: 0.3 Vp-p, negative
R-Y, B-Y channels: 0.7 Vp-p, ±6 dB
Y channel: 0.7 Vp-p, ±6 dB
(Standard color bar signal of 75%
chrominance)
AUDIO IN Phono jack (×1), –5 dBu
47 kilo-ohms
EXT SYNC IN BNC connector (×1)
4 Vp-p, ±6 dB, sync negative
REMOTE 20-pin connector (×1)
See the pin assignment on page 19.
a) 0 dBu = 0.775 Vr.m.s.
Outputs (common to all models)
LINE A/B
VIDEO OUT BNC connector (×2) loop-through,
Automatic 75 ohms termination
AUDIO OUT Phono jack (×2) loop-through
LINE C
Y/C OUT 4-pin mini-DIN (×1) loop-through,
Automatic 75 ohms termination
AUDIO OUT Phono jack (×1) loop-through
RGB/COMPONENT
R/R-Y,G/Y,B/B-Y OUT: BNC connector (×3)
loop-through
Automatic 75 ohms termination
AUDIO OUT Phono jack (×1) loop-through
EXT SYNC OUT BNC connector (×1)
Automatic 75 ohms termination
Speaker output Output level: 0.8 W
General
For PVM-14M4U:
CRT
Power consumption 90 W (with SDI: 99 W)
a)
, more than
Power requirements 120 V AC, 50/60Hz, 1.0 A
Dimensions (w/h/d) Approx. 346 × 340 × 431 mm
Mass
a)
, more than
Accessory supplied AC power cord (1)
For PVM-14M4E/14M4A:
CRT
Power consumption 90 W (with SDI: 99 W)
Power requirements 100 to 240 V AC, 50/60Hz, 1.2–0.5 A
Peak inrush current
(1) Power ON, current probe method: 18 A (240 V)
a)
, more than
(2) Hot switching inrush current, measured in
Dimensions (w/h/d) Approx. 346 × 340 × 431 mm
Mass
Accessory supplied AC power cord (1)
For PVM-14M2U:
CRT
Power consumption 90 W (with SDI: 99 W)
Power requirements 120 V AC, 50/60Hz, 1.0 A
Dimensions (w/h/d) Approx. 346 × 340 × 431 mm
Mass
Accessory supplied AC power cord (1)
SMPTE-C phosphor
× 13 × 17 inches)
5 1
(13 ⁄ ⁄
8 2
not incl. projecting parts and controls
Approx. 16.7kg (36 lb 13 oz)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
EBU phosphor
accordance with European standard EN55103-1:
4 A (230 V)
× 13 × 17 inches)
5 1
(13 ⁄ ⁄
8 2
not incl. projecting parts and controls
Approx. 16.7kg (36 lb 13 oz)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
P-22 phosphor
× 13 × 17 inches)
5 1
(13 ⁄ ⁄
8 2
not incl. projecting parts and controls
Approx. 16.7kg (36 lb 13 oz)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
17