Assembly; Control Panel - CASO DESIGN Cafe Crema One Manual De Instrucciones

13.2 Assembly

Place the coffee grounds container on to the
inner drip tray and push it into the appliance.
Then insert the drip tray with the drip grid.
Adjust the adjustable coffee outlet according to
the selected cups / cup size. Fill the water tank
with water and insert it.
Warning: Crushing hazard!
► Be careful when you insert the coffee grounds container and the drip
► Do not touch the area behind and above or behind and beneath the
► Empty the internal drip tray regularly as water is also collected in it.
Check that everything has been assembled correctly.

13.3 Control panel

Buttons: On/off switch
milk foam function
espresso function
LED displays
Flashing: Water has to be added or the water tank is not positioned correctly.
Bean container is empty, beans must be refilled
constantly illuminated: Coffee grounds container is full, empty the container
Flashing: The container is not correctly inserted. Place it correctly.
trays.
adjustable coffee outlet
in the photo.
Please note
Exclusively adjust the coffee outlet as shown
.
Latte macchiato function
hot water function
coffee function
47