Setting Mode; Changing Settings - Esoteric N-01XD Manual Del Usuario

Setting mode

The settings for this unit are divided into three groups: Settings 1,
Settings 2 and Settings 3.
The Settings 1, Settings 2 or Settings 3 group will be shown depend-
ing on how the MENU button is pressed.

Changing settings

1
When stopped or during playback, press the
MENU button.
Settings 1 will be shown.
To show Settings 2, press the MENU button again for at least two
seconds while Settings 1 is shown.
To show Settings 3, press the MENU button again for at least two
seconds while Settings 2 is shown.
2
Press the MENU button repeatedly to select the
item to change.
Each time you press the MENU button, the item shown on the
display changes as follows.
Settings 1 Settings 2
UPC> PCMM>
c c
CLK> DSDF>
c c
PCMG> LanLED>
c c
AOUT> NETin>
c c
DIMMER> REMOTE>
c
DPaOFF>
c
APS>
o If you do nothing for ten or more seconds, setting mode will
end and ordinary display will resume.
However, setting mode will not end when Settings 3 AUD_
UPDATE is in use.
o Depending on the selected source and operation status,
some items might not appear.
4 1 3
2
Settings 3
AUD UPDATE>
3
Use the setting adjustment (l/;) buttons to
change the settings.
To change multiple items, repeat steps
4
Press the INPUT button to end setting mode.
Setting mode will also end and the ordinary display will reappear
if nothing is done for ten seconds.
o Settings are retained even if the power plug is disconnected.
2 3
and .
15