Product Specifications - Kinetico MACH Serie Manual Del Propietário

Model
Certified Flow Rate @
1 psi (or less)
Peak Flow Rate**@
0 psi (or less)
Resin per tank, In cu. ft. 0.3
Resin per tank, In litres
Capacity Per Cyle, In
Grains @ Salt Used Per
Cycle Setting LBS
Capacity Per Cyle, In
Grams @ Salt Used Per
Cycle Setting kg
Grains Exchanged Per
Pound of Salt Used
Grains Exchanged Per
kg of Salt Used
Max. Flow Rate to Drain
During Regenerations
Min./Max. Operating
Pressure
Min./Max. Operating
Temperature
Max. Working Pressure
in psi
* Meets California efficiency requirements of 4000 grains exchanged per pound of salt used.
Efficency is only certified at the low salt dosage and was determined in accordance with NSF/ANSI 44
** Manufacturer's tested and verified rate- not certified or verified by NSF or WQA
*** Certification pending
Sodium Information: Systems using sodium chloride for regeneration will add sodium to the water.
The amount of sodium added is proportionate to the amount of hardness removed. People who are on
sodium-restricted diets should consider the added sodium as part of their overall sodium intake.
Inlet Hardness
171 mg/liter (10 grains)
342 mg/liter (20 grains)
513 mg/liter (30 grains)
1192 mg/liter (40 grains)
Kinetico reverse osmosis systems will remove as much as 98 percent of sodium content in the water.
Using potassium chloride as a regenerant will not add sodium to the water.
0
0s 00s*
8 GPM 9 GPM
30.3 L/min 34.1 L/min
12 GPM 16.5 GPM
45.4 L/min 62.5 L/min
0.47
8.5 13.3
4693 @ 1.25 7867 @ 1.8*
9802 @ 2.7
304 @ 0.57 509 @0.81*
635 @ 1.2
3754 @ 1.25 4371 @ 1.8*
3630 @ 2.7
534 @ 0.57 628 @ 0.81*
529 @ 1.2
2.3 GPM 0.69 GPM
8.7 L/min 2.6 L/min
103.4-861.9 kpa
15 to 125 psi
2-49°C
35-120°F
861.9 kPa,
125 psi
Sodium Added
79 mg/liter
149 mg/liter
223 mg/liter
298 mg/liter
00s with 00s
Overdrive
00c
00c with (Europe only)
Overdrive
11 GPM 7 GPM
41.6 L/min 26.5 L/min
15 GPM 15 GPM
56.7 L/min 56.7 L/min
0.4 0.4
11.3 11.3
5222 @ 1.0* 5222 @ 1.0*
338 @ 0.45* 338 @ 0.45*
5222 @ 1.0* 5222 @ 1.0*
751 @ 0.450* 751 @ 0.450*
1.5 GPM 1.5 GPM
5.7 L/min 5.7 L/min
00s 00s with
Overdrive
11.6 GPM 20.5 GPM
43.9 L/min 77.6 L/min
30 GPM 30 GPM
113.5 L/min 113.5 L/min
0.7 0.7
19.8 19.8
12,481 @ 2.7 * 12,481 @ 2.7 *
15,817 @ 4.0 15,817 @ 4.0
809 @ 1.23* 809 @ 1.23*
1025 @ 1.8 1025 @ 1.8
4623 @ 2.7* 4623 @ 2.7*
3954 @ 4.0 3954 @ 4.0
658 @ 1.23* 658 @ 1.29*
569 @ 1.8 569 @ 1.8
2.5 GPM 2.5 GPM
9.5 L/min 9.5 L/min