Technoflex MAMUT 40-G Manual De Instrucciones/Lista De Recambios página 15

1B
OPERATION
1.4 Operation
The force and the necessary vibration to compact the floor is generated through the vibrant box, in
whose interior it is equipped a set of eccentric masses that produce the force and frequency which is
transmitted to the floor for compactation.
The hydraulic control system allows the forward, reverse and to maintain the vibration in a fixed point
without movement of the machine.
The forward and reverse speed are variable in function of the position of the control.
As security measure when the operator works in reverse position, if he falls to the floor or it is among
the machine and a wall, just loosing the control the machine automatically change the sense to a
forward position.
The engine fits on its axis a centrifugal clutch, which allow the exciter to be in a no vibration position
while the engine is in a slow speed level.
To start the machine, it is necessary to operate in the following way:
1) Close the choke lever.
2) Open the fuel cock.
3) Turn the switch in position ON in the gasoline engine.
4) Pull the starter handle and after starting return the starter lever to its original position. In diesel
engine, the starter will return automatically
5) Accelerate progressively until getting the maximum speed.
6) Move the direction lever in the required sense.
ENGLISH 1B-4