Transport; Compactation - Technoflex MAMUT 40-G Manual De Instrucciones/Lista De Recambios

1B
OPERATION
1.5

Transport

To move this compactor plate it is necessary to put it into transport position, pull out the fixation axe A
and move the arm to a vertical position. Fix the fixation axe B into its place.
Throw back the arm until the wheels make contact with the floor, that way the machine will move
rotating smoothly.
It is also possible to move the machine suspending it, then it must be caught firmly for the suspension
point C.
1.6

Compactation

The maximun depth to compact depends of the earth type and its composition, as granulometry,
water content etc., then it should made probes for each earth type.
For compactation in inclination places, we advice to begin the work in the lower point of the ramp and
go up with the reverse movement, that way the operator is situated ahead of the machine in an
elevated position and any danger is avoided by overturn of the machine.
It is recommended that the slopes must be inferior to 30% due to from this level, it could produce a
lubrication difficulty and the engine could be damaged.
For the lateral inclination, not surpass under any concept the maximum allowed 20º, due to exist
overturn danger.
1B-5
Working position Transport position
ENGLISH