Service Menu (Service) - Cameo OPUS H5 Manual De Usuario

SERVICE MENU (Service)

Starting from the main display, press the rotary-push encoder to enter the main menu. Select Quicklight by turning the Service encoder and
press the encoder to confirm.
This takes you to the Service menu, see table:
Service
Select by turning, confirm by pressing, select command by turning, confirm by pressing. Back with BACK.
Default values Factory
User A
User B
User C
Reset All
Pan/Tilt
Head
Test Sequence
Stress Test
Run Motor
Reset Service No
Runtime
Yes
Reset Lamp No
Runtime
Yes
USB Update No
Yes
Password For service purposes only
18
Resets to factory setting
Resets to User A values (save user values: Settings -> Set def. Values)
Resets to User B values (save user values: Settings -> Set def. Values)
Resets to User C values (save user values: Settings -> Set def. Values)
Resets all motors
Resets pan/tilt motors
Resets motors in the device head
Pre-programmed sequence to test all components
Pre-programmed sequence to test all components under maximum load
Activate all motors individually with values of 000 to 255
Do not reset service operation time
Reset service operation time
Do not reset lamp operation time
Reset lamp operation time
Do not run firmware update via USB interface
Run firmware update via USB interface