Operation - Cameo OPUS H5 Manual De Usuario

OPERATION

NOTES
When the lamp is correctly connected to the mains supply, the Cameo logo is shown on the display during start-up and motor reset along
with details of the device model. After this process, the spotlight is ready for operation and the previously activated operating mode is
launched.
The main display is activated automatically after approximately two minutes without input. Press BACK to go up one level in the sub-menus.
In the event of a technical fault, the lamp is switched off, the display shows "Lamp Protected" in red letters and the warning triangle symbol
appears in the top right-hand corner (tap for further information).
The spotlight is operated firstly by means of the rotary push-pull encoder and the BACK button next to the display, and secondly the
pressure-sensitive display (glove-compatible) itself can be used to access all menu items and configure settings intuitively as desired. The
control panels in the main display and in the main menu or sub-menus and their functions are shown in the illustrations below. The fields
marked grey in the illustration of the main display are control panels with direct access.
MAIN DISPLAY
Main menu
Operating mode
Temperature display
Lamp mode
8
Menu item lamp
or warning
W-DMX settings
MAIN MENU AND SUB-MENUS