Master Pumps MPXA08MRCALL Manual De Uso página 19

Noise emission values measured according to
relevant standard.
Acoustic pressure level
LpA 67 dB(A) K = 3 dB(A)
Acoustic power level
LwA 87 dB(A) K = 3 dB(A)
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
MPXP08MALL/25
Mains voltage / frequency 220V-240V~50Hz
Absorbed power
-1
No load speed min
Type of protection / Insulation class
Suction fitting
Delivery fitting
Maximum flow rate
Maximum head
Maximum suction height including load losses
Power cable
Weight
Maximum dimension of pumped solid particles
Maximum admitted working pressure 1.4-2.4 bar
Minimum ambient temperature
Maximum ambient temperature
Maximum temperature of the pumped fluid 35° C
Maximum number of starts per hour, uniformly
distributed
Noise emission values measured according to
relevant standard.
Acoustic pressure level
LpA 64 dB(A) K = 3 dB(A)
Acoustic power level
LwA 84 dB(A) K = 3 dB(A)
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
ATTENTION !
must be worn.
800 Watt
2,850
IPX4
G1"
G1"
3.600 l/h
40 m
8 m
1,5 m H07 RNF
11.5 Kg
3 mm
5° C
40° C
60
ATTENTION !
must be worn.
MPXA15MALL/50
Mains voltage / frequency 220V-240V~50Hz
Absorbed power
-1
No load speed min
Type of protection / Insulation class
Suction fitting
Delivery fitting
Maximum flow rate
Maximum head
Maximum suction height including load losses
Power cable
Weight
Maximum dimension of pumped solid particles
Maximum admitted working pressure 1.8-3.2 bar
Minimum ambient temperature
Maximum ambient temperature
Maximum temperature of the pumped fluid 35° C
Maximum number of starts per hour, uniformly
distributed
Noise emission values measured according to
relevant standard.
Acoustic pressure level
LpA 63 dB(A) K = 3 dB(A)
Acoustic power level
LwA 83 dB(A) K = 3 dB(A)
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. : :< 2.5 m/s²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
1500 Watt
2,850
IPX4
G1"
G1"
5500 l/h
55 m
8 m
1,5 m H07 RNF
24 Kg
1 mm
5° C
40° C
60
ATTENTION !
must be worn.
19