Set 1 Date (Date / Time Setting); Set 2 Code (Adjust The Area Code); Set Lcd (Screen Contrast Adjustment) - Steren TEL-235 Manual De Instrucciones

Set 1 Date (date / time setting)

4.1
In standby mode (hung phone) press SET when the display shows the SET 1 DATE message press SET
1
again.
Look that the year will begin to flash.
Use the DOWN (+) / UP (-) buttons to to edit the year.
2
Press SET to confirm and adjust the month.
3
Press SET and repeat the previous steps to adjust the day, date and time.
4

Set 2 Code (Adjust the area code)

4.2
In standby mode (hung phone) press SET, when the display shows the SET 1 DATE message press once
1
UP button and confirm with SET to enter to SET 2 CODE.
Once you enter, the display will show the CODE 0----- message. Use DOWN (+) / UP (-) to adjust the area
2
code corresponding to your location.
Press SET to confirm and advance in the settings.
3

Set LCD (screen contrast adjustment)

4.3
In standby mode (hung phone) press SET, when the display shows the
1
SET 1 DATE message press twice the UP and confirm with SET to enter to
SET 3 LCD.
When the display shows the LCD message and the contrast value, use
2
DOWN (+) / UP (-) to select one of the 16 levels.
Press SET to select one of the 16 levels.
3
In the standby mode (hung phone)
press FLASH to perform this direct
mode setting.
10