Alarm Setting; Secret Codes Configuration - Steren TEL-235 Manual De Instrucciones

Alarm setting

5.2
In standby mode (hung phone) press ALARM/P.
1
Then press this key repeatedly until you select one
of the 5 available memories.
Once you have selected the alarm, use DOWN (+) / UP (-)
2
to activate or deactivate it. When an alarm is activated, the
ALM icon appears on the display.
Press SET to start with the time settings.
3
Use DOWN (+) / UP (-) to set the alarm time and press SET to confirm and set the minutes.
4
Press SET to confirm and adjust the next alarm.
5
6
Repeat the previous steps to configure other alarms.
The first 3 groups of alarms will be repeated daily. The last two groups will be activated only once.
Secret codes configuration
5.3
With the handset hung, press and hold HOLD/RING until the display shows thePin ---- message.
1
Enter a PIN code of 4 digits with the numeric buttons, for example: Pin 1111.
2
In case of mistakes use DEL to delete and press SET to confirm.
3
12