Anti-Calc System; Cleaning And Maintenance - Hkoenig V5i Manual De Instrucciones

ANTI-CALC SYSTEM

1. The filter is designed to reduce the build-up of limescale which occurs during steam
ironing, this will prolong the working life of your iron. However, please note that the filter will not
completely stop the natural process of limescales build-up.
2. The filter should be replaced with a new one after 2-3 months, in case of using one time
each day. Working life of the filter depends on water you used. Before replace, the filter can still
be used continuously. However, limescales may be most probably built up in steam chamber.
This happens always depending on your local water quality. 1 t is proposed that replace filter as
soon as possible or mix your water with 50% proportion of distilled water.
EMPTYING AND STORING
1. Disconnect the appliance from the power supply and allow the appliance to cool down for
60 minutes at least.
2. After use, si ide out the water tank and pour out all the remaining water.
3. Wind the power cord a round cord storage of the base unit.
4. The iron should be placed on the iron rest plate, lay handle down.

CLEANING AND MAINTENANCE

1. Unplug the appliance from the main supply and let the
iron cool down.
2. Clean the iron with a damp cloth.
3. Wipe off scale and any other deposits on the sole
plate with a damp cloth or non-abrasive(liquid) cleaner.
4. Never clean the appliance under the tap water.