Replacement Of Filter - Hkoenig V5i Manual De Instrucciones

HANDLE
Handle attached ta the base unit used ta carry the appliance. Before use, please put the handle
down as following method: Press down two handle buttons synchronously, and then lay the
handle down. (Fig.9) After use, allow the appliance completely cool down, then wind power cord
a round the cord storage of base unit and put the iron onto base unit. Lift handle up until a "pa"
sound is provided, it indicates that the handle has been locked in place and you can carry the
appliance by the handle. (Fig.10)
CORD STORAGE (OPTIONAL)
1. Unique design for cord storage of base unit provide not only beautiful features, but also
easy storage:
2. After use, unplug the unit from main socket, pour out the remaining water from water tank
after the unit has been completely cooled down.
3. Place iron on base unit, fold supply hose and wind it clockwise a round the cord slots of
the base unit. Tie power cord and folded supply hose together,then wind power cord clockwise a
round the cord slots of the base unit, and Iock the plug with supply hose. (Fig.11 - Fig.14)

REPLACEMENT OF FILTER

Method: SI ide water tank out from base unit, take the filter out from water tank, and then replace
with a new one. After new filter has been installed well into water tank, fill water into water tank to
Max fill level, and then slide water tank back into base unit. (lmmerse filter in water for several
minutes in order to gain better performance in future use.)