Lenco EPB-440 Manual De Usuario página 4

magnetic absorption and the earbuds will be charged
automatically when inserted in their charging cavity. The led of
each earbud will light in red when charging. If there is no red
light, it probably means that the earbud is not well positioned.
When the earbuds are charged, the leds will light blue and then go
OFF.
Charging the charging case
On one side of the casing, you can find the "IN" cover. You can open
this cover and connect the micro USB cable to it. At the other side of
the cable you can connect the USB to a PC or to a USB-AC adaptor
for charging the charging case.
Near the "IN" cover you can see 4 leds: they show the remaining
power in the charging case: 4 blue leds is full, 1 blue led is low
battery: you need to recharge!
To check the remaining power, just short press the POWER KEY, it
will activate the blue leds.
Charging your smartphone
If really needed you can also charge your smartphone with the
charging case of your EPB-440: you can connect the USB cable in the
"OUT" connector of the casing and you will have maximum 850mah
of battery power. This is more an emergency battery, but can
provide between 1 or 2 hours of energy.
Products Specification:
Bluetooth Version: V4.2+BR/EDR
Bluetooth Profiles: HFP1.6/HSP, A2DP and AVRCP profiles.
Bluetooth transmission range: 10 m
Powerbank Battery: 850 mAh
Earphone battery: 45 mAh
Earphone Total Standby time: 1000 hours
Earphone charge time: 1 hour
Earphone Non-stop talking Time: 4 hours
Earphone music listening time: 4 hours
Earphone total Talking time: 100 hours
Waterproof rating: IP67
Power bank input voltage: 5 V
Transmission frequency: 2.4G-2.48GHz
Guarantee
Lenco offers service and warranty in accordance to European law,
which means that in case of repairs (both during and after the
warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs
to Lenco directly.
Important note: If this unit is opened or accessed by a non-official
service center in any way, the warranty expires.
This device is not suitable for professional use. In case of
professional use, all warranty obligations of the manufacturer will
be voided.
Disclaimer
Updates to Firmware and/or hardware components are made
regularly. Therefore some of the instruction, specifications and
pictures in this documentation may differ slightly from your
particular situation. All items described in this guide for illustration
purposes only and may not apply to particular situation. No legal
right or entitlements may be obtained from the description made in
this manual.
Disposal of the Old Device
This symbol indicates that the relevant
electrical product or battery should not be
4