SonoSite S Serie Manual De Uso página 7

To connect AC power
Connect the following cords. See Figure
• DC power cord (A)
• System AC power cord (K)
To remove the ultrasound system
1 Support the ultrasound system, and loosen the screw in each of the four corners of the
mounting plate. If necessary, use a Phillips screwdriver. See Figure
Supporting the system ensures that it doesn't drop when loosened.
2 Lift the system off the two mounting‐plate pegs.
To remove the transducer holder
Using a Phillips screwdriver, loosen the four screws on the back of the transducer holder. See
Figure 2.
Figure 2 Turn screws on transducer holder
1 on page 3.
Figure 3 Turn screws on mounting plate
S Series Stand User Guide
3.
5