Pin Assignments For The I/O Connector Of The Axis Q7900 Rack - Axis Q7406 Instrucciones De Instalación

AXIS Q7406 Installation Guide

Pin assignments for the I/O Connector of the AXIS Q7900 Rack

Pin Function
1 Channel 1, Configurable I/O 1
2 Channel 2, Configurable I/O 1
3 Channel 3, Configurable I/O 1
4 Channel 4, Configurable I/O 1
5 Channel 5, Configurable I/O 1
6 Channel 6, Configurable I/O 1
7 Channel 1, Configurable I/O 2
8 Channel 2, Configurable I/O 2
9 Channel 3, Configurable I/O 2
10 Channel 4, Configurable I/O 2
11 Channel 5, Configurable I/O 2
12 Channel 6, Configurable I/O 2
The following connection diagram gives an example of how to connect an auxiliary device to the
AXIS Q7406.
AXIS Q7406
*12V max 100mA
Description
Digital input - Connect to GND
to activate, or leave floating (or
unconnected) to deactivate.
Digital output - Uses an open-
drain NFET transistor with the
source connected to GND. If
used with an external relay, a
diode must be connected in
parallel with the load, for
protection against voltage
transients.
3.3V
I/O configured as input
I/O configured as output
D
G
S
Page 15
Min input = - 40V DC
Max input = + 40V DC
Max load = 100mA
Max voltage = + 40V DC
(to the transistor)
E.g. push button