Ega Master Aqua Master 79901 Manual De Instrucciones página 11

Dress properly. Remove rings, watches, ties etc. that could be torn by the machine. Do not wear loose
clothing or jewellery, it can all be caught by the machine.
Follow the appropriate Accident Prevention and Safety Procedures.
Never work under the influence of alcohol, drugs or strong medication.
Always make sure that you have a safe foothold.
Maintain a proper footing and balance at all time.
Never work with the machine while standing on a ladder or leaning against a scaffold.
Secure the working place well. Use clamps or a vice to fix the work piece. This leaves both hands free for
operating the machine.
Hold the machine tight during operation.
Keep your working area clean and uncluttered.
Keep children away and do not allow anyone to come into contact with the machine.
Switch off the machine if it stops for any reason and avoid unexpected starting in uncontrolled condition.
Do not operate the tool if it is damaged, wrongly adjusted or incorrectly assembled.
Check pneumatic hose for damage.
Work with oleiferous air only.
Avoid creating sparks in hazardous environment. Always flush work piece and consumable with water
during working.
Do not apply excessive force. The tool performance is better and safer, if it works at the correct speed.
Check for damaged parts.
Before using the machine, check all parts and protective devices carefully to make sure they work soundly
and fulfil the designated function.
Check alignment, connections and attachment of moving parts. Also check, if parts are broken. Parts or
protective devices that are damaged should, if nothing else is mentioned in these operating instructions, only
be exchanged or repaired by qualified personnel. The same applies to defective switches and valve triggers.
If the machine cannot be switched on or off with the valve trigger, it should not be used.
The use of other accessories, or other additional items than recommended in these operating instructions,
may include the risk of bodily injury.
Only operate the tool after a thorough training or under supervision of a trainer.
Never exceed the maximum operation pressure.
Follow the valid national provisions in the country of application.
ATTENTION! Never use the pneumatic hose as a lifting handle!
Wear protective clothing
11