Nokia 6136 Manual Del Usuario página 91

M e d i a
Save channels
1. To start the channel search, select and hold
frequency in 0.05 MHz steps, press
2. To save the channel to a memory location 1 to 9, press and hold the
corresponding number key.
3. To save the channel in the memory location from 10 to 20, press 1 or 2, and
press and hold the number key (0 to 9) you want.
4. Enter the name of the channel, and select OK.
Listen
1. Select Menu > Media
2. To scroll to the channel you want, select
3. To select a radio channel location, briefly press the corresponding number keys.
4. Select Options and one of the following options:
Turn off — to turn off the radio
Save station — to save a new channel by entering the channel's name
Stations — to select the list of saved channels. To delete or rename a channel,
scroll to the channel you want, and select
Mono output or
or in stereo
Loudspeaker or
headset. Keep the headset connected to the phone. The lead of the headset
functions as the radio antenna.
Set frequency — to enter the frequency of the radio channel you want
You can normally make a call or answer an incoming call while listening to the
radio. During the call, the volume of the radio is muted.
When an application using a packet data or HSCSD connection is sending or
receiving data, it may interfere with the radio.
■ Recorder
You can record pieces of speech, sound, or an active call. This is useful when recording
a name and phone number for writing them down later.
The recorder cannot be used when a data call, EGPRS, or GPRS connection is active.
58
> Radio.
Stereo output — to listen to the radio in monophonic sound
Headset — to listen to the radio using the loudspeaker or
or . To change the radio
or .
or , or press the headset key.
Options > Delete station or Rename.