Joie juva Manual De Instrucciones página 8

4. Reassemble the harness ends
onto the junction plate.
!
Thread the shoulder strap
through the shoulder harness
-1
anchor.
12
!
The shoulder harnesses must
be placed in back of the
two iron tubes.
!
During adjustment, make sure
the shoulder harnesses are
not twisted.
!
Use extreme care in threading
the shoulder harnesses
according to the figure. If the
shoulder harnesses are not
secure, they will not protect
your baby properly.
Securing Child
Restraint
see images -
13 19
Note
1. Insert is for infant's
protection. Infant weighing
under 10 kg must use the
insert A or B.
2. If the accessory is insert A,
please assemble the foam
before using the insert.
3. After child is placed into the
seat, check whether the
shoulder harnesses are at
proper height.
7
11
12
12
1
in the Infant Child
13
13
1. Lift the cover of adjustment
button.
14
2. While pressing the adjustment
button located at the front of
the infant child restraint, pull
completely the two shoulder
harnesses of the infant child
restraint.
15
3. Unlock the buckle of the
harnesses by pressing the red
button.
16
14
15
16
12