Technical Specifications - Nintendo 3DS Pro Manual De Instrucciones

7. Technical Specifications

Nintendo 3DS Circle Pad Pro
Product Code CTR-009
Communication Type Infrared communication
Power Supply 1 x AAA (LR03) battery
Dimensions 93.2mm wide x 173.2mm long x 42.3mm thick
Weight Approx. 132g
Battery Life Approx. 480 hours (with alkaline battery)
Note: The battery life depends on the software being used,
how it is used, the environment, etc.
Nintendo 3DS Wrist Strap
Product Code RVL-018(-01)
Materials ABS (plastic parts), Polyester (strap, cord)
Length Approx. 243mm
Weight Approx. 4g
Note: Specifications may be changed without notice.
10
Disposal of this product at the end of its life
At the end of this product's life, please do not dispose of this product in your general
household waste. Instead, please dispose of this product separately in accordance
with your local recycling laws and regulations. For more information on the separate
collection systems for waste electrical and electronic equipment that are available
for consumers, free of charge, near your home, please contact your local municipal
authority.
As an alternative and if you plan to buy an equivalent new product, you may be able
to bring this product to your local retailer who, in exchange for your buying an equi-
valent new product, may take back this product and arrange for its recycling. However,
we would suggest that you first double-check with your local retailer whether they
will offer you this service.
Either way, this product will then be treated in an environmentally sound manner at
a licensed recycling plant and its components will be recovered, recycled or reused in
the most efficient way possible, in compliance with the requirements of the Directive
on Waste Electrical and Electronic Equipment (2002/96/EC) of 27 January 2003.
Under applicable environmental laws, you should always use the available
separate collection systems for waste electrical and electronic equipment.
In some countries, failure to use these systems may even result in sanctions
being taken against you.
Notes:
1. Waste electrical and electronic equipment may contain hazardous substances,
which, if not treated properly, can be harmful to the environment and human
health. Specific treatment of waste electrical and electronic equipment is therefore
indispensable.
2. All Nintendo electrical and electronic equipment that is subject to the above
Directive is designed in a way which takes full account of, and facilitates, its
possible repair, upgrading, reuse, dismantling and recycling.
3. Nintendo and its official distributors support recycling schemes in each European
country and are committed to using the best available treatment, recovery and
recycling techniques in order to ensure both human health and high environmental
protection.
4. The crossed-out wheeled bin symbol (see below) is affixed to all relevant Nintendo
electrical and electronic equipment that has been put onto the market by Nintendo
or its official distributors on or after 13 August 2005. The symbol means that these
products must be collected separately from other waste at the end of their life, in
order to ensure maximum recovery and environmentally sound disposal.
11