0
Operating
the Dishwasher
You could be seriously scalded if you allow hot water
to splash out of the dishwasher.
OPEN THE DOOR
CAREFULLY during
any wash or rinse cycle. Do not
fully open the door until water noises have stopped.
To begin a cycle:
Open the dishwasher
door.
Press the ON button to turn unit on.
Select a wash cycle.
Close the door to begin cycle.
To interrupt a cycle
1.
Open the dishwasher
door just far enough to expose
the control panel.
2.
Press the ON/Off button to turn the unit off.
3.
Wait at least ten seconds or until the water noises
stop before opening the dishwasher door.
4.
To resume the cycle, press the On/Off button and
close the dishwasher
door.
Canceling or changing
a cycle
To cancel or change a cycle, open the dishwasher
door
far enough to expose the control buttons then press and
hold the"Cancel
Reset" buttons for 3 seconds.
Close the door and wait until the dishwasher
completes
the cycle (approx. 1 min). Open the door and press the
ON/OFF button. You may now begin a new cycle.
e"m
Cancel/Reset_
•
Dishware
Drying
At the end of the cycle the dishwasher
will stop and a
period of condensation
drying
will follow. After drying,
the cycle is complete
and depending
on your model:
•
the "Clean" light will illuminate OR
•
the cycle completion
signal will sound OR
•
the countdown
display will show "0" OR
•
When
the
cycles
are
complete,
the
"Sanitized"
indicator
on your
dishwasher
control
panel
will
illuminate. However, if your household
water supply
is to hot your dishwasher's
heating
time
may be
reduced, and the Sanitized indicator may not show.
19