Kindcomfort KMX123 Manual De Uso página 12

12. Make sure the seat does not become caught by the vehicle´s
door or reclining seat. Likewise, check that the seat is properly
and sufficiently fitted.
13. Never try to remove, change or add pieces to the seat or harness
since their basic and security functions may be seriously
affected.
14. Always fasten this safety seat into the vehicle with the seat belt,
even when not in use. Never leave your child unattended when
seated or not.
15. Contact our Customer Service for any question about installing
this child safety seat: +34 943 833 013.
16. Please keep this safety seat away from corrosive products.
17. The manufacturer guarantees the quality of its products but not
the quality of second-hand products or those registered under
other trademarks.
18.The illustrations in this instructions booklet are for information
purposes only. The child restraint may have small differences
from the photographs or images in this instructions manual.
These variations do not affect its approval by ECE Regulation
44/04.
1. USE IN VEHICLES
3-point lap and
diagonal seat belt
2-point lap seat belt
Only suitable for this
particular seat WHEN having
a lap and diagonal seat belt
(3 anchor points)
Only suitable for this
particular seat WHEN an
airbag is NOT active.
22 Child restraint system
Correct installation /
proper
Incorrect installation /
improper
Optional installation
Optional installation
KM0123
2. SEAT PARTS AND FITTINGS
A. Headrest.
B. Group 1 vertical belt hook. (Instalation without IsoFix)
C. Group 2 & 3 vertical belt hook
D. Lateral.
E. Harness pads.
F. Harness straps.
G. Lateral adjustment button.
H. Locking buckle.
I. Buckle release-button.
J. Buckle pad.
K. Harness adjustment button.
L. Group 1 abdominal belt hook. (Instalation without IsoFix)
M. Child seat gradient adjuster.
N. Harness adjuster strap.
O. Red locking clip.
P. Group 2 & 3 abdominal belt hook.
Q. Headrest height adjustment.
R. Top Tether guides for ISOFIX based installation.
S. Top Tether fixing points.
T. Metal harness connector.
3. INSTALLING CHILD SEAT. GROUP 0+.
WARNING
Do not use the child seat on a passenger seat fitted with an active
airbag.
1. Pull the base safety clamp downwards (3.1), align the base with
the metal bar and hooks on the base of the seat (3.2 and 3.3).
2. Slide the base until it is in the position sought, and then release the
base safety clamp when it has reached the correct position and
you hear a "click" (3.4).
3. Move the rear of the base forward and backward. Make sure that
the 4 hooks are secured to the base and metal anchors.
4. Place the child seat in its most reclined position using the red
recliner handle M (3.5).
Group 0+/1/2/3
Only suitable for Group 0+, approx.
0 to 15 months (0-13 Kg.)
www.kindcomfort.com
EN
23